Build or customise your own clocks, just mount the module behind your clock face. : silent clock motor 193-240 of over 5,000 results for 'silent clock motor' RESULTS Price and other details may vary based on product size and color. Short shaft with 17 mm total length and is suitable for a clock face up to around 9 mm thick, will accept all hands with a Euroshaft fitting. The movement dimensions are 56 x 56 x 28 mm. Supplied with black metal hands (hour and minute), red metal second hand and fixing nut with washer. You never have to change to daylight savings time, the movement does it by itself. It will adjust itself automatically to the time of the Cesium Atomic Clock which shows that exact time according to the national time standard. This unique UTS movement has a built-in radio receiver that monitors the DCF low-frequency time signal that is broadcast from Germany (vicinity 1500km Frankfurt, Germany). This is the most accurate clock movement technology in the world today. Radio controlled clock movement UTS 700 DCF 77 PREMIUM, complete set with hands, manufactured in the Black Forest region of Germany. Build or customise your own clocks, just mount the module behind your clock face. Short shaft with 11 mm total length and is suitable for a clock face up to around 4 mm thick, will accept all hands with a Euroshaft fitting.
Custom mounting brackets and the display segments are all 3D printed, while four. This is the most accurate clock movement technology in the world today. The clock is built up on a large piece of MDF, with all 28 motors on the front and the electronics on the back. This clock motor will run the largest hands Coastal Tide Clocks sells up to 17.75 inches.Radio controlled clock movement UTS 700 DCF 77 PREMIUM, complete set with hands, manufactured in the Black Forest region of Germany. This movement is not designed, and will not run, a second hand.
If you are not sure if your hands are compatible, it may be better to purchase hands and motor together.
This movement is not for push-on or square hole mount minute hands. The minute hand shaft has a "I" or OVAL end so the minute hand will not slip on the shaft after the cap nut is installed. The extended distance between the hour and minute hands is an added feature to help with binding and leaves enough room to accommodate larger hands. Will fit through and work with a case/dial/piece of wood up to 3/16" in total thickness. High Torque Quartz Clock Movement (SILENT SWEEP) w/Extended Shaft For Long. HIGH TORQUE SILENT SWEEP CLOCK MOVEMENT (MS21)ĭesigned specifically for use with larger hands, but will run smaller hands. Check out our silent quartz clock selection for the very best in unique or.
0 kommentar(er)
